## Digital Media Center Theatre
The Meyer system has 71 channels across 89 speakers (a number of the outside ring of speakers are in pairs to diffuse localization. Image of the speaker number and placement is below. It’s also the space in the pictures of the AURA WFS below. Those pictures are taken from the back row of the theatre - around where speaker 69 is located.
Up to 40 audio channels can be fed into the system at once and then placed in any arrangement of speakers. We have a number of typical setups already programmed (Atmos 7.1.4, 5.1, 7.1, 8.1, stereo, super-stereo, etc) as well as a number of spacemap arrangements with all of the speakers where you can take a channel and simply place it at the location you want. Once the pieces have been chosen we can work out a couple of arrangements for you to listen to and choose the one you like.
Info about the space can be viewed here: https://emdm.cct.lsu.edu/research/sound-spatialization/

---
# User Guide
## The Stage
- ***Epson Projection***
- ***Floor plates***
- Stage Left - XLR Inputs 1-4
- Stage Front - XLR Inputs 5-10
- Stage Right - XLR Inputs 11-14
- Back - XLR Inputs 15-18
- Mid-house - XLR Inputs 19-20, HDMI to DVI cable projector input
## Back of House
- ***Soundcraft Mixer***
- EMDM Presets - default scene to EMDM default
- Scenes
- ***RedNet Devices***
- 3 RedNet 16 channel Dante to AES/EBU that are connected to the Meyer Dmitri system - AES Inputs 1-40, [Input Channels 220-260]
- A long ethernet cable is coiled up next to the Soundcraft that is rolled out and fed under the seats up to the mid-house position to connect to the Ethernet Switch on the table
- Once connected to the switch, any other computer connected to that switch can use the Dante network to send up to 40 channels in to the system.
- ***Blueray Player*** - feeds directly into the Procise either stereo for 7.1 decoding or direct surround sound channels.
- ***Procise*** (surround sound processor)
- 7.1 decoding going into the Meyer Dmitri input channels just after the overhead mics and before the Soundcraft [inputs 25-33]
- Different stereo to 7.1 decoding presets accessible after pressing the ___ button from the large dial (I like the Jazz one)
- ***Crestron Touch Screen***
- Lighting
- Audio Modes
- Epson Projector
- Press Mid-house for using the HDMI to DVI input cable at the mid-house floor plate
- You must also switch the projector to DVI input
- We no longer use the Lectern Stage Left input because it resamples the image and looks blurry. Instead use the HDMI cable run on the floor and switch the projector manually to HDMI input.
- If you are having trouble getting the projector to respond to the remote - aim the remote at the exit sign above the door at the left side of the auditorium. It bounces the signal right back to the projector.
## Dante
## Meyer DMITRI System
## Cuestation